RC4Magic Series 3 wireless dimming, with black-feathered purple labels, was introduced mid-2014 and is state-of-the-art. Series 3 technology is compatible with Series 2, so you can continue to expand your S2 system by adding new S3 devices.
I. This process for ringing a phone works for all RC4 Series 3 Harmonized Design™ dimmers (RC4Magic Series 3, RC4Magic-900, RC4 LumenDim, RC4 W-DIM). This demonstration uses an RC4Magic Series 3 DMX2dim. A. A Step up is...
I. RC4 Series 3 Harmonized Design devices of all families (RC4Magic, RC4Magic-900, LumenDim, and W-DIM) support two different PWM frequencies and multiple at the same time II. The linear dimmer curve will always be running at 77Hz A....
I. RC4 Series 3 Harmonized Design functionality explained on a DMXio A. On the side of the unit, buttons are behind slotted holes B. On the side of the unit, LED indicators are behind round holes II. LED indicators serve similar functions on all devices A. There is...
Setting the System ID on all RC4Magic 3-button devices is the same procedure. This applies to 2.4GHz RC4Magic Series 2 and Series 3 systems (purple label) and 900MHz RC4Magic-900 (blue label) systems. At power up, a pattern of LED blinks indicates the currently...
I. Using LED tape from different manufacturers can result in wildly different colors A. This can be seen most strikingly by using combinations of primary colors and comparing between different strings: 1. Red/Green for yellow (amber, orange) 2. Green/Blue for cyan 3....
I. The DMXmrx, the DMX2dim and the DMXpix all have three button interfaces A. The DMXmrx is 2.4 GHz in the purple, and 900 MHz in blue B. The DMX2dim is similar to the DMXmrx but has two dimmers 1. There is also a 900 MHz version of this DMX2dim C. The DMXpix also...
This video demonstration is on the RC4Magic S3 DMX4dim device. ISSUE : Banding, beating, and other visual artifacts can be an issue when working with video. In this example, both dimmers start at the default setting of 615Hz. FIX : Increasing the PWM frequency...
I .Accessing special feature dimmer curves using RC4 Enhanced OneTouch (requires firmware version 4.080 / 2.80.x.x or higher) A. Enhanced OneTouch provides all available dimmer curves starting at channel level 20 (absolute decimal level 20, not 20%) 1. A value of 20...
I. All RC4 4-channel dimmers act the same way, even though there are different sizes and have different label colors A. Buttons are behind slots B. Colored LED indicators are behind round holes C. Associated buttons and LEDs are close to each other 1. For example, the...
I. Components needed to ring a telephone with a DMX2dim A. An old style land line phone B. An RC4Magic Series 3 DMX2dim 1. This will need to be configured with a special dimmer curve that selects the C. a small center...