I. When working with LumenRadio wireless RDM protocol products, it’s best to use a LumenRadio TX1 or TX2 transmitter A. The RC4 LumenDimIO basic CRMX transmitter is not RDM-capable and cannot be used with SuperNova software II. Using the LumenRadio SuperNova software...
RC4 LumenDim wireless dimmers use genuine LumenRadio CRMX RF technology and are compatible with LumenRadio and Wireless Solution W-DMX transmitters.
RC4 LumenDim Cross-Fade Mode with WW/CW LEDs
I. When doing motion picture work and using warm/cool white LED panels, it’s useful to be able to pick color temperatures as a mix of warm and cool A. Cross-fading between the warm/cool white channels to find the correct color temperature is required B. The brightness...
Configuration Using RC4 OneTouch™ (RC4 LumenDimPix)
I. The RC4 LumenDimPix is very similar to the RC4Magic DMXpix, but the RC4 LumenDimPix works with a LumenRadio Transmitter A. It has the same features as the RC4Magic DMXpix B. Overview and RC4 OneTouch™ tutorials for the RC4Magic DMXpix can be used for the RC4...
Ring a Telephone Using RC4 AC-Wave Synthesis (LumenDimM4)
I. Creating a telecue with an RC4 LumenDimM4 A. The LumenDimM4 and all RC4 Series 3 dimmers can be used as wireless or wired DMX devices II. Components needed to ring a telephone with a LumenDimM4 A. An old style land line phone B. An RC4 LumenDimM4 1. This will need...
Example: Set DimC to DMX Ch 10, Linear Curve (LumenDimM4)
I. Setting DimC (the third dimmer) to the to control a halogen lamp A. The channel should be set at 70% to indicate the linear curve B. In this example, it is being done on channel 10 C. Recap: Set Channel 10 (the channel) to...
RC4 ColorMatch™ Two Different LED Tapes
I. Using LED tape from different manufacturers can result in wildly different colors A. This can be seen most strikingly by using combinations of primary colors and comparing between different strings: 1. Red/Green for yellow (amber, orange) 2. Green/Blue for cyan 3....
Set PWM Frequency to Eliminate Video Artifacts
This video demonstration is on the RC4Magic S3 DMX4dim device. ISSUE : Banding, beating, and other visual artifacts can be an issue when working with video. In this example, both dimmers start at the default setting of 615Hz. FIX : Increasing the PWM frequency...
Multiple Voltages, Just One Wireless Dimmer!
I. Low voltage batteries, called cells, can be connected in series to produce larger voltages. This is how most battery packs work, and it's what is happening in the battery compartment of most battery-powered consumer electronics and toys. A. Access to multiple...
The 8 Modes in RC4 Series 3 Wireless Dimmers
I. There are various dimmer modes available in RC4 Series 3 Harmonized Design devices A .The process of selecting modes is the same for all RC4Magic, RC4Magic-900, LumenDim and W- DIM devices 1. There are small differences between 2 channel and 4 channel devices....
Adjusting RC4 Digital Persistence™ to Emulate Halogen Lamps (LumenDimM4)
I. RC4 is a feature that makes LED brightness rise and full in a manner similar to incandescent lamps II. The default on the RC4 LumenDimM4 is the with medium RC4 Digital Persistence™ time A....