1-866-258-4577
Select Page

RC4 LumenDimM2 Two-Channel CRMX Wireless Dimmer

$514.25$544.25

Product Information

A small two channel dimmer ideal for bicolor LED tape. Provides all RC4 Series 3 features including cross-fade mode for easy color temperature control with warm-warm/cool-white LED sources.

Each LumenDimM2 purchase comes with one 1dBi antenna.

The RC4 LumenDimM2 is a small, low-voltage (6 – 35VDC) 2-channel wireless DMX dimmer using the LumenRadio CRMX/CRMX2 wireless platform. It is ideal for driving LEDs, lamps, motors, and much more, in props, costumes, and set pieces. The device provides an outstanding wireless RDM (remote device management) experience, as well as super-smooth 19-bit LED dimming, high-power halogen dimming, hobby servo-motor positioning, a sophisticated effects engine and more.

All RC4 LumenDim devices include a genuine LumenRadio TiMo CRMX2 radio receiver. Easily assign any DMX channel and dimmer curve to any dimmer with the press of a single button using RC4 OneTouch™, or use Remote Device Management (RDM) via wired or wireless connection.

  • PWM frequencies Optimizations for power handling, smoothest resolution, eliminating artifacts in video, and eliminating noise in audio systems.
  • Tungsten lamp dimming
  • Servo motor control
  • RC4 Digital Persistence™ A carefully engineered thermal model makes LEDs fade up and down like incandescent and halogen lamps.
  • HSL Color Controller Choose to use Hue/Saturation/Level (brightness) control of color if desired.
  • RC4 ColorMatch™ Match color palettes and white-balance different LED sources from different manufacturers.
  • RC4 Flkr Effects Engine™ Create personalized visual effects, including fire, welding spark, and much more.
  • Remote Device Management (RDM) The DMX standard for device configuration, including E1.37 dimmer control extensions.
  • RC4 CodeLoader Update firmware to add features.  Since 2014, more than 10 new features have been added at no cost to users!

This device has two channels, ideal for warm/cool white or dual-color LED color-mixing. The RC4 Cross-Fade Controller delivers best-in-class color mix consistency over the entire dimming range, by ensuring precise primary color ratios even at very low dimmer levels using 19-bit (524,288 step) dimming. Unlike 8-bit DMX control of color mix from a console, which is limited to 256 steps and becomes heavily quantized at low levels, the RC4 Cross-Fade Controller maintains high ratiometric precision throughout the dimming range.

Learn more about working with the LumenDimM2 at the RC4 Knowledge Base.

The warmth of incandescent lighting has long been favored by lighting designers, and for good reason; natural filament persistence ensures smooth fades even when console control resolution is relatively coarse. RC4 Digital Persistence™ brings this same pleasing smoothness to LED dimming, with a range of eight persistence periods emulating a variety of halogen lamp sizes.

The LumenDimM2 also features multiple dimmer curves for LEDs, tungsten lamps, non-dim loads (like solenoids and relays), and servo motor position clockwise and counter-clockwise.

Screw terminals are provided for connection of the power supply (+/-DC IN) and load devices (+/-DimA, +/-DimB). The supply powers both the internal electronics and the connected loads. Dimmers switch on the negative side of the circuit, ideal for common-anode (common positive) LED tape. Dimmer output voltage is precisely the DC power input voltage with no appreciable losses within the 16A total power handling limit of the device.

The mini-plug wired DMX data port can be used with a range of RC4 DMX cables, including 3-pin and 5-pin male and female XLR adapters. The most common adapter is the RC4DMX5FA with 5-pin female XLR connector.  This port can output DMX data to nearby fixtures including fog machines, moving lights, and projector dousers. The DMX port can also be configured as a DMX input, allowing the LumenDimM2 to be used as a wired dimmer.

Either wireless or wired, a comprehensive RDM implementation includes E1.37 dimmer configuration parameters, numerous status sensors (voltage, temperature, current), and each individual dimmer appears as an RDM sub-device.

Looking to fit a 2-channel dimmer into a small flashlight or the handle of a sword? Check out the LumenDimM2micro!

All prices and specifications are subject to change without notice.

  • Dimensions:  3.14″ x 1.57″  x  .787″ (80mm x 40mm x 20mm)
  • Weight: 2.10oz
  • Power Input: 6VDC – 35VDC, 0.4W, screw terminals
  • Dimmer Outputs: 2 low-voltage DC dimmers, screw terminals, 19-bit resolution PWM (524,288 steps)
  • Output Power, per Dimmer: 10A non-continuous, 5A continuous
  • Maximum Total Power Handling: 16A (limited by safety rating of input screw terminals)
  • Multiple PWM frequencies: 77Hz (high power), 615Hz (flicker free), 5kHz (artifact free for video), 20kHz (noise free for audio), 40kHz (super-slow-motion video)
  • Multiple Dimmer Curves: Non-Dim, Non-Dim Inverted, Linear, Linear Inverted, Inverse-Square-Law (ISL for LEDs), ISL inverted, servo motor pulse clockwise (CW), servo motor pulse counter-clockwise (CCW), AC wave (ring telephone bells and more)
  • DMX Input/Output: RC4 3.5mm mini, USITT DMX512/1990 data, non-standard port, connector adaptors available. RDM E1.20 and E1.37 (dimmer configuration) support
  • Wireless DMX Protocol: All RC4 LumenDim devices are now being manufactured with Lumen Radio TiMo radio modules. The latest firmware is fully compatible with CRMX transmitters running both CRMX2 and CRMX Classic, as well as transmitters from Wireless Solution running in G3, G4, G4S or G5 2.4GHz mode
  • RF Antenna: RP-SMA external, omnidirectional. Alternate antennas can be used for increased sensitivity and directionality

Unsure which product is best for your needs?

Use our RC4 Online Product Guide to find the best devices for your needs.

SHARE YOUR ORDER