RC4Magic-900 operates in the 902-928MHz ISM RF band. It is licensed only for interference-free operation in USA, Canada, Brazil, Australia, and New Zealand. Due to advantages in 900MHz technology, performance is superior to 2.4GHz systems.
I. Using LED tape from different manufacturers can result in wildly different colors A. This can be seen most strikingly by using combinations of primary colors and comparing between different strings: 1. Red/Green for yellow (amber, orange) 2. Green/Blue for cyan 3....
All RC4 Series 3 devices share the same firmware code-base for handling RDM messages through RC4 Harmonized Design™. There are some minor variations for device types and available features. For RC4 Series 3 dimmers, including RC4Magic, RC4Magic-900, RC4...
These instructions apply to all RC4 Series 3 Harmonized Design™ devices with firmware versions 4.071 / 2-71-x.x or later. Applicable OneTouch devices include: RC4Magic S3 2.4GHz and RC4Magic-900 DMX4dim, DMX4dim-500, LumenDim4, LumenDimM4 If you are working with a...
These instructions apply to all RC4 Series 3 Harmonized Design devices with firmware versions 4.071 / 2-71-x.x or later. Applicable devices include: RC4Magic Series 3 and RC4Magic-900 DMX2dim, DMX4dim, DMX4dim-500 LumenDim4, LumenDimM4 W-DIM4, W-DIMm3 Digital...
This article outlines the terminology used in RC4 Series 3 Device User Interface (UI) Charts. Each RC4 device has it's own concise chart describing every feature that is accessible with the buttons and LEDs on the device. RC4 devices intentionally provide a very...
Your RC4Magic Series 3 and RC4Magic-900 devices are programmed with four system ID codes. Three of those codes (ID0, ID1, and ID2) are unique to your system alone — when you select your ID0, it is not the same as another user’s ID0, ensuring different systems will...
These instructions apply to all RC4 Series 3 Harmonized Design devices with firmware versions 4.071 / 2-71-x-x or later. Applicable devices include: RC4Magic Series 3 and RC4Magic-900 DMX2dim, DMX4dim, DMX4dim-500 LumenDim4, LumenDimM4 W-DIM4, W-DIMm3 Mode...
These instructions apply to all RC4 Series 3 Harmonized Design devices with firmware versions 4.071 / 2-71-x.x or later. Applicable devices include: RC4Magic Series 3 and RC4Magic-900 DMX2dim, DMX4dim, DMX4dim-500, DMX4dim, DMX6dim-500 LumenDim4, LumenDimM4,...
The DMXmrx (RC4Magic S3 DMXmrx or RC4M-900SX DMXmrx) is based on a DMX2dim dimmer, but with the dimmers hardware omitted. DMX data is provided through a miniplug-to-XLR adaptor, and DC power must be connected to power input screw terminals. When you refer to the...
As of firmware version 4.064, RC4 wireless pixel controllers including the RC4Magic DMXpix and RC4 LumenDimPix can be configured entirely using RC4 OneTouch. Every patent-pending feature is accessible using nothing but a standard DMX controller and the recessed...