I. There are various dimmer modes available in RC4 Series 3 Harmonized Design devices A .The process of selecting modes is the same for all RC4Magic, RC4Magic-900, LumenDim and W- DIM devices 1. There are small differences between 2 channel and 4 channel devices....
RC4 W-DIM wireless dimmers use genuine Wireless Solution W-DMX RF technology and are compatible with Wireless Solution W-DMX transmitters.
Multiple Voltages, Just One Wireless Dimmer!
I. Low voltage batteries, called cells, can be connected in series to produce larger voltages. This is how most battery packs work, and it's what is happening in the battery compartment of most battery-powered consumer electronics and toys. A. Access to multiple...
RC4 ColorMatch™ Two Different LED Tapes
I. Using LED tape from different manufacturers can result in wildly different colors A. This can be seen most strikingly by using combinations of primary colors and comparing between different strings: 1. Red/Green for yellow (amber, orange) 2. Green/Blue for cyan 3....
RC4 Harmonized Design™ – Supported RDM PIDs
All RC4 Series 3 devices share the same firmware code-base for handling RDM messages through RC4 Harmonized Design™. There are some minor variations for device types and available features. For RC4 Series 3 dimmers, including RC4Magic, RC4Magic-900, RC4...
How to Use RC4 S3 ColorMatch™ (firmware v71 or higher)
These instructions apply to all RC4 Series 3 Harmonized Design devices with firmware versions 4.071 / 2-71-x.x or later. Applicable devices include: RC4Magic Series 3 and RC4Magic-900 DMX2dim, DMX4dim, DMX4dim-500, DMX4dim, DMX6dim-500 LumenDim4, LumenDimM4,...
RC4 S3 Dimmer Mode Selection (firmware v71 and higher)
These instructions apply to all RC4 Series 3 Harmonized Design devices with firmware versions 4.071 / 2-71-x-x or later. Applicable devices include: RC4Magic Series 3 and RC4Magic-900 DMX2dim, DMX4dim, DMX4dim-500 LumenDim4, LumenDimM4 W-DIM4, W-DIMm3 Mode...
RC4 Series 3 User Interface Nomenclature
This article outlines the terminology used in RC4 Series 3 Device User Interface (UI) Charts. Each RC4 device has it's own concise chart describing every feature that is accessible with the buttons and LEDs on the device. RC4 devices intentionally provide a very...
Adjust RC4 S3 Digital Persistence Period (firmware v71 or higher)
These instructions apply to all RC4 Series 3 Harmonized Design devices with firmware versions 4.071 / 2-71-x.x or later. Applicable devices include: RC4Magic Series 3 and RC4Magic-900 DMX2dim, DMX4dim, DMX4dim-500 LumenDim4, LumenDimM4 W-DIM4, W-DIMm3 Digital...
Adjust RC4 S3 Dimmer PWM Frequency (firmware v71 or higher)
These instructions apply to all RC4 Series 3 Harmonized Design™ devices with firmware versions 4.071 / 2-71-x.x or later. Applicable OneTouch devices include: RC4Magic S3 2.4GHz and RC4Magic-900 DMX4dim, DMX4dim-500, LumenDim4, LumenDimM4 If you are working with a...
Pairing RC4 W-DIM Receivers with W-DMX Transmitters
This document applies only to RC4 LumenDim devices, including: W-DIMm3 W-DIM4 Pairing RC4 W-DIM Receivers with W-DMX Transmitters RC4 W-DIM devices must be paired with a Wireless Solution or compatible W-DMX transmitter before they can be used wirelessly. RC4 Series...