I. When working with LumenRadio wireless RDM protocol products, it’s best to use a LumenRadio TX1 or TX2 transmitter A. The RC4 LumenDimIO basic CRMX transmitter is not RDM-capable and cannot be used with SuperNova software II. Using the LumenRadio SuperNova software...
I. RC4 does not recommend using a low voltage DC dimmer to control mains-powered AC devices A. If at all possible, the high voltage product should be converted to a low voltage product, either by modifying it (for example, replacing the motor in a fan) or finding a...
I. The RC4Magic DMX2micro is the world's smallest DMX dimmer A. The RC4 LumenDimM2micro is the model that works with LumenRadio CRMX transmitters B. The steps in this process are the same for both units C. All RC4 Series 3 dimmers are able to synthesize an AC wave D....
I .Accessing special feature dimmer curves using RC4 Enhanced OneTouch (requires firmware version 4.080 / 2.80.x.x or higher) A. Enhanced OneTouch provides all available dimmer curves starting at channel level 20 (absolute decimal level 20, not 20%) 1. A value of 20...
I .Accessing special feature dimmer curves using RC4 Enhanced OneTouch (requires firmware version 2.80.x.x or higher) A. Enhanced OneTouch provides all available dimmer curves starting at channel level 20 (absolute decimal level 20, not 20%) 1. A value of 20 on a...
These instructions apply to all RC4 Series 3 Harmonized Design devices with firmware versions 4.071 / 2-71-x.x or later. Applicable devices include: RC4Magic Series 3 and RC4Magic-900 DMX2dim, DMX4dim, DMX4dim-500, DMX4dim, DMX6dim-500 LumenDim4, LumenDimM4,...
These instructions apply to all RC4 Series 3 Harmonized Design devices with firmware versions 4.071 / 2-71-x-x or later. Applicable devices include: RC4Magic Series 3 and RC4Magic-900 DMX2dim, DMX4dim, DMX4dim-500 LumenDim4, LumenDimM4 W-DIM4, W-DIMm3 Mode...
Your RC4Magic Series 3 and RC4Magic-900 devices are programmed with four system ID codes. Three of those codes (ID0, ID1, and ID2) are unique to your system alone — when you select your ID0, it is not the same as another user’s ID0, ensuring different systems will...
This article outlines the terminology used in RC4 Series 3 Device User Interface (UI) Charts. Each RC4 device has it's own concise chart describing every feature that is accessible with the buttons and LEDs on the device. RC4 devices intentionally provide a very...
These instructions apply to all RC4 Series 3 Harmonized Design devices with firmware versions 4.071 / 2-71-x.x or later. Applicable devices include: RC4Magic Series 3 and RC4Magic-900 DMX2dim, DMX4dim, DMX4dim-500 LumenDim4, LumenDimM4 W-DIM4, W-DIMm3 Digital...