1-866-258-4577
Select Page

RC4 Knowledge Base

DMXio: Restore Defaults/ Factory Settings

After the DMXio has powered up and initialized

1. Using a small tool like a bent paper clip, push and hold the Function buttonFunction buttonEvery RC4 Harmonized Design™ device provides a Function button, sometimes called the Func, Shift or Shift/Func button, to increase the number of available functions available with the other buttons. The Func button also invokes CodeLoader mode when held down during power-up.
Read more »

2. Using a second bent paper clip, tap the button beside it, the ID 3ID 3Every RC4Magic device can use a Public ID, numeric code 999, which is the same on every RC4Magic system ever made.  The Public ID is sometimes identified as ID3 on device labels and in documentation — they are the same. Using the Public ID is the only way to use devices from different systems together.  No […]
Read more »
also labelled as the Public IDPublic IDEvery RC4Magic device can be configured to use the Public ID, numeric code 999, which is the same on every RC4Magic system ever made.  Using the Public ID is the only way to use devices from different systems together.  No other wireless DMX system from any manufacturer provides the level of system security provided by RC4Magic […]
Read more »
button

3. Release both buttons

(Complete this entire 2-button process in less than 3 seconds to avoid invoking a long-press feature on the Shift/Func button)

E. The yellow and green LEDs will blink several times together to indicate the process occurred, and the unit will restart with default factory settings

RC4 recommends resetting the dimmer defaults at the beginning of any new production

 

I. RC4Magic Series 3 DMXio factory default settings are:

  1. ID0 selected
  2. Auto Mode to automatically invoke transmit or receive based on system context
  3. Highest RF power
  4. TX Low Channel is 1
  5. TX High Channel is 512
  6. DMX Termination is off
SHARE YOUR ORDER