Wireless DMX A pair of RC4Magic Series 3 DMXio units replaces a DMX data cable in lighting control applications. Configure one device as a transmitter, and one or more devices as receivers. Any number of DMXio receivers can be used. Thus, a multi-unit RC4Magic Series...
RC4Magic Series 3 wireless dimming, with black-feathered purple labels, was introduced mid-2014 and is state-of-the-art. Series 3 technology is compatible with Series 2, so you can continue to expand your S2 system by adding new S3 devices.
RC4Magic Series 3 (2.4GHz) Firmware Updates
An RC4 CodeLoader cable or equivalent is REQUIRED to upload to Series 3 devices. Purchase a CodeLoader cable. Current firmware versions for all RC4 device families are posted at https://www.rc4wireless.com/download/....
Methods for Controlling EL-Wire
Electroluminescent (EL) material delivers a very unique and recognizable look. In simplest technical terms, it is capacitive in nature and converts AC power into light. Increasing the AC voltage and the frequency both increase brightness -- to a point. Excessively...
Remote Device Configuration Using RC4 Commander Software
Start with Basic Wireless Dimming Before you can make use of this guide, you need your RC4 Wireless system up and running in basic wireless dimming mode. Find the RC4Magic Series 3 Quick Start Guide at: http://www.rc4wireless.com/support/manuals/ For sophisticated DC...
RC4 OneTouch™ To Set DMX Channels and Dimmer Curves
These instructions apply to all RC4 Series 3 Harmonized Design™ devices, including: RC4Magic Series 3 Wireless Dimming (2.4GHz) and RC4Magic-900SX : DMX2dim, DMX4dim, DMX4dim-500, DMX6dim, DMX6dim-500 RC4 LumenDim for LumenRadio CRMX : LumenDimM4, LumenDim4,...