I. Connecting four color (RGBx) LED tape to the LumenDimM4

A. Configuration can be completed with a single press of a single button

B. The colors will be assigned to consecutive DMX channels

II.Setting four color LED tape on LumenDimM4 starting on channel 39

A. No channels below channel 39 should be on.

B. For the , the fader of the first channel being assigned should be placed at 30%

C. Using a small tool like a bent paper clip, push the Set A ButtonSet A ButtonAll RC4 dimmers have Set buttons for each individual dimmer output. The first button is the Set A button. On a 2-channel device these are Set A and Set B buttons. A 4-channel device adds Set C and Set D. The most common use of the Set button is to assign a DMX channel and […]
Read more »

E. Set A causes all 4 dimmers to be assigned to consecutive channels using the same curve

D. Test using faders/levels on the console

1. Channel 39 will control DimA, indicated by the DimA LED

2. Channel 40 will control DimB

3. And so on

F. Wire up the LED tape to the terminals to complete the process (explained in a separate video)